The pumping of the VAZ-2109 ignition lock consists of several contacts and wires supposed to them. The connection scheme is quite simple.

WAZ-2109 Ignition Castle Connection Scheme

Maintain most cars and go further helps the device provided for such an operation – ignition lock. They are equipped with both foreign production cars and products of domestic auto industry, in particular, our "nines". A breakdown or malfunction of this element will create difficulties for starting the engine by the driver.

Variety of locks for VAZ 2109

Refusing left-sided location as in "Classic", the designers took care of a comfortable right place to use the key in the first front-wheel drive cars. This added ergonomics in the cabin. To perform its function, the primary used for the start of the car, the element is equipped with two composite blocks:

• mechanical;
• electric.

The first unit is responsible for fixing the steering wheel, while the key is removed. In the second block there is a sprinkler of the VAZ-2109 ignition lock, which is assigned a mission to supply voltage to electrical appliances and consumers.

The developers provided for certain electrical devices in the ninth model "Lada", which are capable of working out regard to the state of the ignition block. These include:

• Car flashing accident;
• "Foot" from the rear lights;
• overall optics;
• salon lighting;
• Light bulbs light flap of devices.

It should be borne in mind that the VAZ-2109 ignition lock circuit is adjusted under its direct species. Two types of locks can be installed in the "nines":

• late sample in which there are three positions, the relay does not use and activate is carried out by a short key;
• Early sample in which there are four fixed positions, built-in relays and a long key is provided.

Typically drivers easily visually define the type of system installed. You can navigate the working length of the key.

Used inclusion modes

Each of the crosspins there is a connection of certain devices. Before the socket in a circle there is a markup with a position to which a certain mode corresponds.

Null

To activate this mode, it is enough to insert the key to the "Secret". In this case, devices remain active to the battery directly.

Additional consumers will be commissioned after turning the larvae to a certain angle. Voltage enters contacts 30/1 and 30.

First – "Ignition"

In the first position, the driver is available on the turning on the front lighting, like the Middle and Far Lamp Lamp. The responsiveness is glowing tidy and salon. The VAZ-2109 Ignition Castle Connection Scheme is used at this turn, the starting current for a pair of 30-int.

When there is a connection of the conclusions 30/1 and 15/1, the rear lights, the reverse light, turn signals are operational, and the generator excitation winding is fueled. Also gets the power supply electromagnetic valve XX.

In this position, contacts 30/1 and 15/2 are closed, which ensures work, except for head light optics, the functioning of fog, rear window cleaner and its heating. Faroocitators, the heater fan and the engine coolant propeller coolant are derived for this contact.

Second – "Starter"

Transfering the key to the current position, the driver does not block the connection of the electrostators running at the previous position "Ignition". This applies to full as closed contacts of the pair of 30/1 – 15/1 and to a pair of 30 – Int.

The main change, which gives a scheme for connecting the VAZ-2109 ignition lock in such a situation, is the work of the contact pair of 30-50. This allows you to start the starter.

It is important to know that the key independently key in the starter position is not detected, and it springs it in the previous position automatically, as soon as the driver will weaken the effort.

Third – "Parking"

With such an angle of rotation, consumers remained activated by the "ignition" position, closed contacts 30 – Int. A closed pair of 30/1 – P is also added. It is responsible for parking lighting.

We test serviceability

The service life of the lock is limited. After reaching it, it is necessary to repair or fully replace the product. Performance is checked after inserting the key in the "Secret".

Malfunctions appear due to mechanical wear or contact loss. Verification is carried out by the key. If it begins to jam, then as a temporary solution, it is possible to use silicone lubricant, pinning it inside.

So that the wire connection scheme function correctly, you need to know which contacts to connect to each other. Usually use the following system for wires:

• Red connects with a cable from the starter;
• Pink wire goes to "+" from 12 to battery;
• Brown +12 V is involved for starting the ignition relay;
• White – switching on the relay;
• Black and blue combine other consumers.

It is necessary to check the contacts for nagar or the possibility of oxidation. Fitting contacts will be able to hear in the cabin on the characteristic smell of burnt isolation.